How To Fill Water In The Inverter Battery?
Every inverter owner will eventually discover that inverters require water. This information may generate numerous queries. Why is it necessary to add water to the inverter battery? How much water do we require? What occurs if the inverter battery water level is excessive? Is it dangerous?
This article will address the importance of inverter battery water, the type of water used in batteries, and some dos and don'ts for filling your inverter with water.
Why Does a Battery Inverter Need Water?
Inverters use chemical reactions to convert direct to alternating current and power your devices. However, as is typical for chemical reactions, they rarely operate at full capacity without any problems.
Acid is used in chemical reactions, and its pace lowers as it grows more concentrated. This occurs because there is insufficient water in the battery chamber to create an appropriate acid-water balance. A drop in frequency also affects the inverter's output level.
Typically, diluted sulphuric acid is utilized inside inverters. Always maintain a full water level in the inverter to guarantee that the sulfuric acid is sufficiently diluted and does not lose effectiveness over time.
However, the inverter should not be filled with just any water. It is recommended that only distilled water be used for inverter batteries. Why? Keep reading.
What is Distilled Water?
Distilled water is the purest form of water possible. It is so pure that it lacks the ions found in ordinary water. Due to its composition, distilled water has several uses, including recharging inverter batteries, vehicle batteries, and medical applications.
Why Use Distilled Water for Inverter Batteries?
Normal water contains ions. If you use tap water to charge your batteries, the ions will clog the electrodes, form a coating, and hinder the chemical reactions that generate electricity.
The reactions that produce energy in batteries will be hindered if the water contains organic molecules or dust particles.
Devoid of these ions, distilled water poses no challenges for the electrodes. Therefore, only distilled water should be utilized for inverter battery water. It ensures the proper operation of the batteries.
Where Can I Get Battery Distilled Water?
Although it is possible to distill water at home, the procedure can be laborious, and you may be better off purchasing a gallon of distilled water at a nearby store.
When to Add Water to an Inverter, and How Much Water Is Sufficient?
On each battery is an indication indicating the water level of the inverter battery. If the indicator is at the "Green" mark, the inverter has appropriate water and has been filled. If it is at the "Red" sign, the water level is below the recommended level, and replenishment is necessary.
Ensure the water level is always below the Green and Red mark. If it falls below Red, the acid concentration is too high, and the inverter cannot work at its peak. If the water level exceeds the Green level, the acid has been overly diluted, compromising its performance.
Steps For Filling Distilled Water in the Inverter Battery:
- Check the water level indicators to determine the amount of distilled water in the battery. These indicators indicate the quantity of distilled water within the inverter battery. While the mark on the lower level is red, the mark on the higher level is green.
- If the water level is low, as shown by the red mark, it is time to add more water. Be sure to turn off the inverter and the electrical socket switch before beginning. You would like to avoid any mistakes.
- Now remove the water top vent plugs by turning them counterclockwise.
- After removing the vent plug, place a funnel in the opening (the top half of a pet bottle can serve as a makeshift funnel) and slowly pour the filtered water into the chamber.
- Repeat this procedure for each compartment. The water level can be measured by inserting the vent plus back into the hole and filling it until the green mark is reached.
- Now reinstall the vent plug and turn it clockwise to seal the chamber. Apply this procedure to each chamber in the same manner.
- Use a clean cloth to clean the batteries, the vent plugs, and the water level indicators.
- After refilling the battery with pure water, you can switch the power back on.
Conclusion
An inverter is crucial for any contemporary home, particularly if you encounter frequent power outages.
Not only can it keep your lights and fans running during a blackout, but it can also power additional appliances if necessary. Just note that only pure water can be used for your inverter battery.
Search for the Battery dealer and shop near you on Finndit.com. You will get correct and relevant information regarding the batteries on Finndit.
View Also -
What is AH In Inverter Battery?
Amaron Battery, How Many Years Warranty?
